Fraction of non-renewable biomass (fNRB): the methodology sets rules for it (RECH v5.0 ICS 20, p. 68). CarbonMeld reads it in the project's documents. CM-F-GS-TPDDTEC-FNRB
GS-TPDDTEC — Reduced emissions from cooking and heating (RECH) (formerly TPDDTEC)
About this methodology
Projects introduce technologies or practices that reduce or displace emissions from the thermal energy used by households and by institutional, industrial or commercial facilities. The methodology covers technologies whose fuel use is estimated rather than metered.
- Issued by
- Gold Standard (GS) · issuer's site
- Version
- 5.0 · source ·
- Climate outcome
- Emission reductions
- Activity
- Cooking and heat
- ICVCM Core Carbon Principles
- Official page
- globalgoals.goldstandard.org ·
Approval applies to the programs and versions listed. The official decision and project-specific conditions must also be met for credits to carry a CCP label; this is not a label for the projects on this page.
How methodology v3 reads projects of this type
What CarbonMeld reads
- shown
A confirmed investment analysis A-INVEST
The documents show a project-level additionality test, the validation confirmed it, and it is an investment analysis (a numeric test of the project's finances with and without carbon revenue).
No usage monitoring (cookstoves, biogas, water treatment) Q-NO-USAGE-MONITORING
Cookstoves, biogas and water treatment: the monitoring or verification reports that CarbonMeld read give no usage rate. For biogas and water treatment, the rule applies where the methodology asks for a usage survey or an operation survey. Where CarbonMeld read no monitoring or verification report, the rule does not apply. A usage check by the verifier counts as usage monitoring. Operation logs and the share of units still in operation count too. CarbonMeld applies this rule only where a check of the documents has confirmed its condition; without that check, the rule takes no points.
Figures set against the methodology's own values
fNRB above the official value, or an older default Q-FNRB-ABOVE
CarbonMeld compares the fraction of non-renewable biomass (fNRB) with the official national value of the country. The rule applies to any project whose documents give an fNRB that CarbonMeld can compare with the official value. A project gets one fNRB deduction at most. Three sources of values get no deduction: TOOL33 version 03.0, A6.4-AMT-009, and a MoFuSS assessment whose stated year is 2024 or later.
Above the official national value plus its 30% uncertainty.
Deductions that can apply
fNRB above the official value, or an older default Q-FNRB-OLD-DEFAULT
CarbonMeld compares the fraction of non-renewable biomass (fNRB) with the official national value of the country. The rule applies to any project whose documents give an fNRB that CarbonMeld can compare with the official value. A project gets one fNRB deduction at most. Three sources of values get no deduction: TOOL33 version 03.0, A6.4-AMT-009, and a MoFuSS assessment whose stated year is 2024 or later.
An older default value. This includes the TOOL33 values before version 03.0, the older national defaults and MoFuSS values whose stated year is before 2024. It also includes any other value that the documents give as a default. The CDM's fixed default of 0.3 is the exception. Only the two «above» cases can apply to it.
Set by the methodology or the programme, not assessed by our current method
- not assessed
Leakage: the methodology sets rules for it (RECH v5.0 §9.3, p. 40). Our current method does not assess it. CM-F-GS-TPDDTEC-LEAKAGE
- not assessed
Sustainability of the feedstock: the methodology sets rules for it in some cases. Our current method does not assess it. CM-F-GS-TPDDTEC-FEEDSTOCK-SUSTAINABILITY
- not assessed
Social safeguards and consent of communities (FPIC): any such rules come from the programme, not the methodology. Our current method does not assess it. CM-F-GS-TPDDTEC-SAFEGUARDS-FPIC
Not applicable to this type — never a gap in our current method
The criterion does not apply to this methodology. Our current method never counts it as a gap.
- CM-N-GRID-EFGrid emission factor
- CM-N-BUFFERBuffer pool
- CM-N-PERMANENCE-REVERSALPermanence and reversals
- CM-N-REGULATORY-SURPLUSNo legal requirement for the activity
- CM-N-DURABILITY-MEASUREMENTDurability of the storage
- CM-N-END-USE-TRACKINGTracking of the end use
The general rules apply as well. Read the general rules.
The rules of methodology v2.2, as they were: the archived v2.2 page.
History and transitions
Scope moved to GS-SAFE-WATER
Note that first version of this methodology (this document) replaces the “Annex 3 Application of the methodology to safe water supply project” of Gold Standard methodology “Technologies and Practices to Displace Decentralized Thermal Energy Consumption”.
Top projects using GS-TPDDTEC
This page ranks projects using GS-TPDDTEC by their CarbonMeld document-based ratings. The rank compares project ratings; it is not a rating of the methodology itself.
63 rated projects of the 754 tracked in this methodology · average rating 4.6/10 · ranked by CarbonMeld's document-based rating: additionality, quantification, permanence (where carbon is stored) and claim safety. Showing the top 50.
476 analysed project pages, A–Z →
Which registries list projects under GS-TPDDTEC?
In CarbonMeld's data, GS-TPDDTEC projects are on one registry: Gold Standard (754 projects, 626 registered).
| Registry | Projects | Registered | Projects list |
|---|---|---|---|
| Gold Standard (GS) | 754 | 626 | See the list |
Counts of project records in CarbonMeld's data, with or without a CarbonMeld analysis, so they can be larger than the ranking below. «Registered» counts the records whose current registry status is «registered», as last read (20 November 2026); projects in a later status, such as awaiting verification approval, late to verify or completed, are not in that column.
- 4 7
- 5 6.8
- 6 6.8
- 7 6.8
- 8 6.8
- 9 6.8
- 10 6.8
- 11 6.8
- 12 6.8
- 13 6.8
- 14 6.8
- 15 5.2
- 16 4.9
- 17 4.9
- 18 4.9
- 19 4.7
- 20 4.1
- 21 4
- 22 4
- 23 4
- 24 4
- 25 4
- 26 4
- 27 4
- 28 4
- 29 4
- 30 4
- 31 4
- 32 3.8
- 33 3.8
- 34 3.8
- 35 3.8
- 36 3.8
- 37 3.8
- 38 3.8
- 39 3.8
- 40 3.8
- 41 3.8
- 42 3.8
- 43 3.8
- 44 3.8
- 45 3.8
- 46 3.8
- 47 3.8
- 48 3.8
- 49 3.8
- 50 3.8
